Fine control on flow of oil to oil burners Size: 1, 2A, 2B, 2C, 2D.
Orifice Limiting Gas Valves regulates the flow of gas in the burner for adjustment of air / gas ratio Size: ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 4”.
Automatic normally closed solenoid valves (Madas) that open when the coil is powered and close when there is no tension. The solenoid valves are controlled by PID Controllers Size: ½”, ¾”, 1”, 1 ½”, 2”, 3”, 4”
Air/Oil Ratio Controllers are used for automatic control proportioning of oil and air Ratio. Air/Oil Ratio Controllers maintains the balance between fuel and combustion air for complete combustion in burner. It is used to control burner from high-fire to low-fire. Size: ½”, ¾”.
Air-Gas Ratio Controllers (Madas) gives constant air / gas ratio at all the firing rates. In that case, the regulator outlet pressure is equal to air impulse pressure and the gas remains proportional to air flow at all the firing rates. In premix burners and nozzle mix burners, separate regulator for each burner is preferred to avoid interference or interaction. Size: ¾”, 1”. 1 ½”, 2”.
Screwtype Butterfly Valve:Controls Atomizing and Combustion Air to Burners. Size: ¾”. 1”, 1 ½”, 2”, 2 ½”, 3”
Screw Type Butterfly Valves
Waffer Style Butterfly Valve:Controls Combustion Air to Burners. Size: 3”, 4”, 5”, 6”, 7”, 8”, 9”, 10”
Waffer Style Butterfly Valve
Maintains constant pressure on oil line for heating and pumping unit. Size: ½”, ¾”, 1”
Low Leakage type valve with modulating motor used for P.L.C, Air Shut off, Air/oil,gas regulation. Size: 1”, 1 ½”, 2”, 2 ½”, 3”, 4”, 5”, 6”